Miata Tail Light Gasket

The Miata is a great car. But, like all cars, it has its problems. One of the most common problems with the Miata is that the tail light gasket wears out.

This causes the tail light to leak and can eventually lead to rust and other damage. The good news is that replacing the gasket is relatively easy and inexpensive.

The Mazda Miata is a popular sports car that has been in production since 1989. The Miata is known for its affordability, reliability, and driving experience. One of the most notable features of the Miata is its tail light gasket.

The tail light gasket on the Miata serves two purposes: to seal the taillight assembly from water and debris, and to provide a cushion between the taillight lens and the body of the car. Over time, the gasket can become worn or damaged, causing water and debris to enter the taillight assembly. This can lead to problems with the electrical system and ultimately result in a broken tail light.

If you own a Miata, it’s important to check your tail light gasket regularly and replace it if necessary. A new gasket is relatively inexpensive and easy to install, so there’s no excuse not to keep your Miata in top condition!


Na01-51-158 is a star in the constellation of Aquila. It is an orange dwarf star of spectral type K0V, and is around 51 light years away from Earth. This star has a mass of 0.78 solar masses, and a radius of 0.76 solar radii.

It has a surface temperature of 4,790 Kelvin, and is around 8.6 billion years old. Na01-51-158 is thought to have one or more planets orbiting it, but no further information is currently known about these potential worlds.

What is a Miata Tail Light Gasket

If you own a Mazda Miata, then you know that one of the most important parts of the car is the tail light gasket. Without this vital component, your taillights would be susceptible to water damage and other elements. The good news is that replacing your Miata’s tail light gasket is a relatively easy process that can be done in just a few minutes.

The first thing you’ll need to do is remove the two screws that hold the taillight assembly in place. Once those are removed, gently pull the assembly away from the car body. Be careful not to break any of the plastic tabs that hold the wires in place.

Next, locate the old tail light gasket and peel it away from both sides of the lens. If there is any adhesive residue left behind, use a razor blade or other sharp object to scrape it off. Once both sides are clean, align the new gasket with the lens and press it into place.

Now simply reattach the taillight assembly and screw it back into place. That’s all there is to it! With fresh new Miata tail light gaskets, you can rest assured that your taillights will stay protected no matter what kind of weather comes your way.

Why Does My Miata Need a Tail Light Gasket

If you own a Mazda Miata, you may have noticed that your taillights don’t always sit flush with the car’s body. Over time, the gasket that seals the taillight to the body can degrade, allowing water and dirt to enter the area around the taillight. This can lead to rust and other damage.

To prevent this, it’s important to replace your Miata’s tail light gasket when it starts to show signs of wear. The tail light gasket is located between the car’s body and the taillight assembly. It’s made of rubber or foam and helps to seal out water and dirt.

Over time, exposure to the elements can cause it to deteriorate. When this happens, it’s no longer able to do its job properly. If you live in an area where there’s a lot of rain or snow, or if you frequently wash your car with a high-pressure hose, your tail light gaskets are more likely to degrade sooner than those in drier climates.

If you start to notice that your taillights aren’t sitting flush against your car’s body anymore, it’s a good idea to check the condition of your tail light gaskets. If they’re cracked or brittle, they need to be replaced. Installation is relatively simple; most replacement gaskets come with adhesive backing that makes them easy to install yourself.

How Do I Install a Tail Light Gasket on My Miata

Assuming you have a Mazda Miata and would like to know how to install a Tail Light Gasket, here are the steps: 1. Park your Miata on level ground and set the emergency brake. 2. Lift up the rear hatch and unscrew the two screws that hold the taillight assembly in place with a Phillips screwdriver.

3. Unplug the electrical connector from the back of the taillight by pressing on the release tab and pulling it away from the socket. 4. Pull the taillight assembly out of its opening and set it aside. If there is any old sealant or debris around the opening, clean it away with a rag before proceeding.

5. Take your new gasket and peel off one side of its backing paper. Line up one edge of the gasket with one side of the opening, then press it into place firmly so that its adhesive will stick properly.

Episode 52 – Tail Light Gasket Replacement 1995 Mazda Miata MX-5


If your Mazda Miata is leaking water from the tail lights, it’s most likely due to a faulty tail light gasket. Replacing the gasket is a pretty easy job that anyone can do with just a few tools. You’ll need a new gasket, some sealant, and a few other supplies.

Once you have everything, just follow these simple steps: 1. Remove the old gasket. This is usually done by prying it off with a screwdriver or similar tool.

2. Clean up the area around the taillight opening. Make sure there’s no old sealant or debris left behind. 3. Apply sealant to the new gasket and then press it into place around the taillight opening.

4. Install the new bulb and screw in the retaining ring to secure it.

Leave a Comment

Your email address will not be published. Required fields are marked *