Harley-Davidson has been in the business of motorcycles for over a century. The company is known for their quality bikes and accessories, and their tail light bulbs are no exception. Led bulbs are becoming increasingly popular in the automotive industry, and Harley-Davidson has jumped on board with this trend.
Their led tail light bulbs are some of the best on the market, and they offer a great way to customize your bike.
Are you looking for a new tail light bulb for your Harley? If so, you may be wondering what the best option is. LED bulbs are becoming increasingly popular for motorcycles, as they offer a number of advantages over traditional incandescent bulbs.
LED bulbs are much brighter than incandescent bulbs, so they will help make your motorcycle more visible to other drivers. They also last much longer than incandescent bulbs, so you won’t have to replace them as often. And since they don’t produce as much heat as incandescent bulbs, they’re less likely to cause damage to your taillight lens.
If you’re ready to make the switch to LED, we’ve got a great selection of Harley LED tail light bulbs to choose from. We carry both single and dual-function LEDs, so you can find the perfect replacement for your bike. And we offer a variety of different colors and styles, so you can customize the look of your taillights.
So take a look at our selection and find the perfect Harley LED tail light bulb for your bike!
Led Tail Light for Harley Davidson Softail
Harley-Davidson softail motorcycles are some of the most popular bikes on the road. But one of the most common complaints about them is that their tail lights are not very bright. This can be a serious safety issue, especially if you’re riding at night or in bad weather.
Fortunately, there’s an easy solution to this problem: LED tail lights. These lights are much brighter than traditional incandescent bulbs, so they’ll make your bike more visible to other drivers. And best of all, they’re relatively inexpensive and easy to install.
If you’re looking for an LED tail light for your Harley-Davidson softail, there are several things to keep in mind. First, you’ll need to choose a light that’s specifically designed for motorcycles. There are many different styles and sizes of motorcycle LED tail lights on the market, so it’s important to find one that will fit your bike properly.
Second, you’ll want to choose an LED light that’s bright enough to be seen during the day as well as at night. Many motorcycle LEDs are available in bothamber and red colors. Amber is often used during the daytime because it’s easier for other drivers to see, while red is better for nighttime visibility.
Finally, you’ll need to decide how you want to mount your new LED tail light. Some people prefer to bolt it onto their fender or frame, while others like to use a universal mounting kit that attaches the light directly onto their license plate holder . Regardless of how you choose to mount it , make sure your new light is securely in place before hitting the road .
What Bulb is in Harley Tail Light?
If you’re looking for a replacement bulb for your Harley tail light, you’ll need to know what kind of bulb is in there first. Depending on the model of Harley, the tail light might have a different type of bulb. However, most Harley models use an 1157 dual-filament bulb.
This type of bulb has two filaments – one for the brake light and one for the running/tail light. The brake light filament is usually brighter than the running/tail light filament. You can buy replacement bulbs at any auto parts store or online retailer.
Can You Replace a 1157 Bulb With Led?
If you’re looking to replace a 1157 bulb with an LED, there are a few things you’ll need to keep in mind. First and foremost, LEDs operate on direct current (DC), while 1157 bulbs require alternating current (AC). This means that you’ll need to use a LED-compatible flasher relay in order for the LED to function properly.
Additionally, the polarity of LEDs is important to consider – if your LED is not properly polarized, it will not light up at all. When replacing a 1157 bulb with an LED, it’s important to choose an appropriately rated LED. The wattage of an LED is typically much lower than that of a incandescent bulb, so you’ll want to make sure you don’t exceed the maximum wattage rating for your vehicle’s electrical system.
Additionally, pay attention to the voltage rating of the LED – most 1157 bulbs are 12V, but some LEDs may be rated for higher or lower voltages. If you’re unsure which voltage is appropriate for your application, consult with a professional mechanic or electrician. In terms of installation, replacing a 1157 bulb with an LED is no different than any other kind of automotive lighting upgrade.
Make sure all power is disconnected before starting work, and follow any instructions that come with your specific product. Generally speaking, though, installing an LED in place of a 1157 bulb should be relatively simple – just make sure to connect the positive and negative wires correctly!
How Do You Remove a Blinker Bulb from a Harley?
Assuming you are talking about a Harley Davidson motorcycle:
To remove the blinker bulb from a Harley Davidson motorcycle, you will need to first disconnect the battery. Next, locate the turn signal housing on the bike – this is usually located near the front fender.
Once you have found the housing, unscrew the lens cover and carefully remove it. Inside the housing, you will see the bulb socket – twist this counterclockwise to loosen and then pull it out. You can now replace the old bulb with a new one by twisting it into place clockwise.
Finally, screw the lens cover back on and reconnect your battery.
Harley Touring LED Tail and Brake Light Bulbs
In order to keep your Harley tail light shining brightly, you need to regularly check and change the bulb. While this may seem like a daunting task, it is actually quite easy to do. You will first need to purchase a new bulb from your local Harley dealer or an online retailer.
Once you have the new bulb, simply remove the old one by unscrewing it from the socket. Next, insert the new bulb into the socket and screw it in place. Be sure to not overtighten the new bulb as this could cause damage.
Finally, test your new tail light by turning on your ignition and activating the turn signal.