The C10 was a game changer when it came to trucks. It was the first truck to have a standard tail light and fuel filler neck. This made it easier for people to fill up their gas tanks and get their truck beds full of dirt and debris.
The C10 was also the first truck to come with an optional four-wheel drive system. This allowed people to take their truck off-road and into the backcountry without worrying about getting stuck.
The C10 is a popular truck that many people use for work and play. It’s known for its durability and power, but did you know that it also has a secret fuel filler? That’s right – the C10 has a tail light fuel filler that allows you to fill up your tank without having to open the hood.
This is a great feature if you’re in a hurry or if you don’t want to mess with the engine. Just pop open the tail light, insert the nozzle, and fill ‘er up!
Fuel Filler for C10
If you own a Chevrolet C10, then you know that one of the most important parts of the truck is the fuel filler. This small piece of equipment allows you to fill up your gas tank without having to worry about spillage or leaks. However, over time, the fuel filler can become damaged or worn out, which can lead to serious problems.
That’s why it’s important to know how to properly care for your fuel filler and what signs to look for that indicate it may need to be replaced.
The first thing you need to do is make sure that you always use clean gas when filling up your C10’s tank. Dirty gas can clog up the fuel filler and cause it to malfunction.
If you notice that your filler is starting to have trouble drawing in gas, then it’s probably time to clean it out. You can do this by using a soft brush and some gasoline-approved cleaner. Just be sure not follow any cleaning instructions too closely, as doing so could damage your fuel filler beyond repair.
Next, pay attention to the gasket that seals off the connection between the fuel filler and the gas tank. This gasket can deteriorate over time, which will eventually lead to leaks. If you notice any cracks or other damage on the gasket, then it’s best to replace it as soon as possible before bigger problems occur.
Finally, take a look at the overall condition of your fuel filler every now and again. If it looks rusty or otherwise damaged, then it’s probably time for a replacement. Fortunately, replacements aren’t too difficult or expensive to come by – especially if you buy one from a reputable source like GTP Fuel Systems.
With a new fuel filler in place, you’ll be able drive your C10 worry-free for many miles (and years)to come!
What are the Benefits of a C10 Tail Light Fuel Filler
There are many benefits of a C10 Tail Light Fuel Filler. One benefit is that it helps to improve the look of your car. It can also make it easier to find your fuel cap, and it can help to protect your paint job.
Additionally, a C10 Tail Light Fuel Filler can help to keep your car’s interior clean and free of debris.
How Does a C10 Tail Light Fuel Filler Work
Assuming you are referring to the C10 Chevrolet truck:
The C10 Chevy truck came with a rear-mounted fuel filler, which was actually located in the tail light on the driver’s side. The way it worked was that when you opened the tailgate, there was a lever that you had to push down in order to open the fuel filler door.
There was also a small hole in the bottom of the taillight lens that served as an overflow for excess fuel.
To fill up the tank, you would unscrew the cap on top of the gas tank (located under the bed) and then insert the hose from the gas pump into this opening. Once the pump clicked off, indicating that the tank was full, you would remove hose and screw the cap back on.
Then, you would go back to your truck and push up on lever in tail light, which would close fuel filler door.
What are Some Common Problems With C10 Tail Light Fuel Fillers
If you own a 1973-1987 Chevrolet or GMC truck with a Fleetside body, chances are good that you have run into some problems with your C10 tail light fuel filler. These common issues can be easily fixed, but it is important to identify them in order to keep your truck running smoothly.
One of the most common problems with C10 tail light fuel fillers is that they tend to leak.
This can be caused by a number of things, but the most likely culprit is a faulty gasket or seal. If you notice that your tail light fuel filler is leaking, be sure to check the gasket for any cracks or damage. You may also want to try replacing the gasket altogether.
Another possibility is that the leak is coming from the filler neck itself. In this case, you will need to replace the entire filler neck assembly.
Another common issue with C10 tail light fuel fillers is that they can become clogged over time.
This problem is usually caused by dirt and debris build-up inside the filler neck. The best way to clean a clogged C10 tail light fuel filler is to remove it from the vehicle and then use a small brush or compressed air to remove any dirt or debris from inside the neck. Once you have cleaned out the filler neck, be sure to reattach it securely before driving your truck again.
If you are having trouble getting your C10 tail light fuel filler to work properly, there are a few things you can try before taking it in for repairs. First, check all of the connections between the filler neck and the taillight housing. Make sure that everything is snug and secure.
Next, take a look at the wiring harnesses connecting the taillight housing to the rest of your truck’s electrical system. If any of these wires are loose or damaged, they could be causing problems with your taillight operation.
1972 Chevy C-10 Hidden Tail Light Fuel Filler
Conclusion
This blog post is all about the C10 Tail Light Fuel Filler. The author starts off by talking about how this product can make your life easier and how it works. He then goes into detail about the installation process and what you need to do to get it set up.
Lastly, he talks about how this product can help you save money on fuel costs.