99 Civic Si Tail Lights

The 1999 Civic Si came with some very distinct and stylish tail lights. Unfortunately, many of these cars are now starting to show their age and the tail lights are often one of the first things to go. If your Civic Si is in need of new tail lights, you’re in luck.

There are a few different options available that can help you get your car looking like new again.

There’s nothing quite like the look of a set of Si tail lights on a Honda Civic. They just seem to make the car look more aggressive and sporty. And if you’re lucky enough to have a set of these tails on your ride, then you know that they can really set your car apart from the rest.

But what if you’re not so lucky? What if your Civic Si doesn’t come with factory-installed Si tail lights? Well, don’t worry – you can still get that same great look for your car.

There are plenty of aftermarket options out there that will give your Civic theSi treatment. So, if you’re looking to add some style to your Civic Si, or even if you just want to replace those boring factory taillights, then check out some of the great aftermarket options that are available. You’re sure to find a set of tails that will fit your taste and budget.

1999 Honda Civic Led Tail Lights

If you own a 1999 Honda Civic, then you know how important it is to keep your tail lights in good working order. After all, they are what help other drivers see you at night and in low-light conditions. Plus, they add a touch of style to your car.

But over time, the clear plastic lenses on your Civic’s tail lights can become cloudy and yellowed from exposure to the sun and elements. This can make your car look old and dated. But there’s no need to worry!

You can easily restore your Civic’s tail lights to their original glory with some simple cleaning and polishing. Start by washing the outside of each lens with soapy water and a soft cloth. Then, use a mild abrasive cleaner like rubbing alcohol or vinegar to remove any stubborn grime or build-up.

Rinse the lenses well afterwards and dry them completely. Next, apply a small amount of automotive polish or wax to each lens using a clean, soft cloth. Buff the lenses until they’re shining brightly.

Q: How Do I Replace the Tail Lights on My 99 Civic Si

Assuming you would like tips on how to replace the tail lights on a 1999 Honda Civic Si, here are some instructions. First, you will need to open the trunk and locate the two bolts that hold the taillight assembly in place. Remove these bolts and carefully pull the assembly away from the car.

Be careful not to disconnect any of the wires. Next, remove the old bulbs from their sockets and insert new ones. Make sure they are tight so they don’t come loose while driving.

Now you can reattach the taillight assembly and replace the bolts. Close up the trunk and test your new tail lights by turning them on.

Once You Have Accessed the Back of the Assembly, You Can Twist Each Bulb Counterclockwise to Remove It from Its Socket

If you need to replace a light bulb in your home, it is important to know how to do so safely. Replacing a light bulb is a simple task, but there are a few things you should keep in mind. First, make sure that the power is turned off before you begin.

Once you have located the circuit breaker or fuse box, turn off the power to the area where you will be working. This will prevent you from accidentally electrocuting yourself. Next, locate the light fixture and unscrew the cover.

Once the cover is removed, you will be able to see the back of the fixture and the bulbs. In most cases, there will only be one bulb that needs to be replaced. However, if more than one bulb needs to be replaced, it is best to replace them all at once.

This will ensure that all of the bulbs are matched and produce an even light. To remove a bulb, simply twist it counterclockwise until it comes out of its socket. Once the old bulb has been removed, insert a new one into the socket and screw it in clockwise until tight.

Finally, screw on the cover and turn on the power.

To Install New Bulbs, Simply Insert Them into Their Sockets And Twist Clockwise Until They are Secure

To install new bulbs, simply insert them into their sockets and twist clockwise until they are secure. Make sure to match the size and type of bulb to the socket; you can usually find this information printed on the side of the old bulb. Once the new bulbs are in place, turn on your headlights (or whatever else uses those bulbs) to test them out.

The rear looks SO MUCH better! | 50/50 Tail lights for honda civic ek coupe


If your Civic Si is from 1999-2000, then you have the JDM Honda Integra Type R tail lights. These are the clear tail lights with the red reflectors. They were only available in Japan and Europe, so they’re pretty rare.

If you have these tail lights, then you’re one of the lucky ones!

Leave a Comment

Your email address will not be published. Required fields are marked *