77 Corvette Tail Lights

I’m a sucker for a good set of tail lights, and the 77 Corvette has some of the best. I love the way they look, and they really stand out on the road. I’ve always been a fan of Corvette’s, and this is one of my favorite features on the car.

The 77 Corvette was the first year for the C3 body style and featured dramatically different tail lights. The new lights were larger and wrapped around the back of the car, giving it a unique look that set it apart from other cars on the road. The change was controversial at the time, but has since become one of the most iconic features of the Corvette.

C3 Corvette Tail Light Lenses

If you’re a fan of the Chevrolet Corvette, then you know that the C3 was produced from 1968 to 1982. And if you’re really into your Corvettes, then you know that the C3 is distinguished by its four round tail light lenses. But what you might not know is that there are actually three different types of tail light lenses used on the C3 Corvette.

The first type is the most common and was used from 1968 until 1970. These lenses were made of glass and had a chrome trim ring around the outside. The second type was used from 1971 until 1973 and were also made of glass but did not have the chrome trim ring.

The third and final type was used from 1974 until 1982 and were made of plastic with a red or amber tint. So, there you have it! A little bit of trivia about the C3 Corvette’s tail light lenses.

Now you can impress your friends next time they ask about those cool looking lights on your car!

Q: What is the Difference between the 77 Corvette Tail Lights And Other Tail Lights

The 77 Corvette Tail Lights were a change from the previous year’s design. The most notable difference is that the turn signal indicator was moved from the center of the taillight to the outer edge. This change was made to improve visibility and make it easier for other drivers to see when the driver was signalling a turn.

In addition, the new design included two small red lights on either side of the turn signal indicator, which served as brake lights.

They are Also Made With High-Quality Materials That Make Them Durable And Long Lasting

When it comes to choosing the right type of dinnerware for your restaurant, you want to make sure that you are getting a quality product that will last. That is why many restaurants choose to use melamine dinnerware. Melamine dinnerware is made with a durable plastic that is dishwasher safe and break resistant.

This makes it an ideal choice for busy restaurants who need to be able to clean their dishes quickly and easily. Additionally, melamine dinnerware can often be found in fun and trendy designs that will give your restaurant a unique look.

Q: How Do I Install the 77 Corvette Tail Lights

Assuming you would like tips on installing 1977 Corvette tail lights: One important thing to keep in mind when working with any electrical system is to disconnect the battery before starting. This will prevent any shorts from causing damage or injury.

1. Start by removing the two screws that attach the lower corner of the rear bumper to the fender on each side. There are also two bolts holding the top of the bumperettes (the small vertical bumpers at each end of the rear bumper) in place. Remove these as well.

With all four fasteners removed, gently pull the rear bumper away from the car until it’s loose enough to work with. 2. Next, remove the two screws attaching each taillight bezel to the car body. These are located just inside of each taillight opening, and can be reached throught he hole in each bezel.

With both screws removed, carefully pull out each bezel and set them aside. 3. Now you should see three wires running into each taillight opening: one for power, one for ground, and one for brake/turn signals (this wire is usually green). There will also be a fourth wire leading from one taillight assembly to the other; this is your license plate light connection and does not need to be disconnected for this job.

4. Starting with either taillight, disconnect all three wires from their respective terminals on the old light assembly then remove that entire unit by unscrewing its single retaining nut inside of the fender well (it helps to have a friend hold onto things while you do this). 5a) If your new lights came with bulbs already installed, go ahead and skip down to step 6 now – otherwise, continue reading! To install new bulbs in your assemblies: first twist counter-clockwise on bulb socket about 1/8 turn then pull straight out – note which way around it comes out so you can put it back in correctly later!

With socket removed, insert new bulb then push socket firmly back into place until it “clicks” indicating it’s locked in securely.. Repeat process for other side marker light(s), backup light(s), and main taillights as needed until all new bulbs are installed.


However, We Recommend That You Consult With a Professional Mechanic Or Installer to Make Sure Everything is Done Correctly

When it comes to installing a new car stereo, there are a few things you need to take into account. However, we recommend that you consult with a professional mechanic or installer to make sure everything is done correctly. For starters, you’ll need to remove the old car stereo and disconnect any wiring.

Next, you’ll need to connect the new car stereo and run any necessary wiring. Finally, you’ll need to test the new car stereo to make sure it’s working properly.

Q: What are Some of the Benefits of Having the 77 Corvette Tail Lights

The 77 Corvette Tail Lights are one of the most popular and iconic features on the Corvette. They provide a unique look that can really set your car apart from the rest. There are many benefits to having them, including:

1. Improved Visibility – The 77 Corvette Tail Lights offer improved visibility over standard taillights. This is especially helpful when driving at night or in low-light conditions. 2. Enhanced Style – The unique design of the 77 Corvette Tail Lights can really enhance the style of your car.

They add a touch of class and elegance that will make heads turn wherever you go. 3. Increased Safety – The improved visibility offered by the 77 Corvette Tail Lights can help to increase safety on the road. This is because other drivers will be able to see your car more easily, making it less likely that they’ll accidentally run into you.

4. Easy Installation – The 77 Corvette Tail Lights are very easy to install, even for those with little or no experience working on cars. All you need is a few basic tools and some patience, and you’ll be able to get them up and running in no time flat!

Restoring the tail lights on 1976 corvette stingray


The Corvette is a sports car that has been manufactured by Chevrolet since 1953. The 77 Corvette was the first year for the now-famous tail lights, which have become an iconic part of the Corvette’s design. The tail lights were designed to improve visibility and safety while driving at night.

Leave a Comment

Your email address will not be published. Required fields are marked *