5Th Gen 4Runner Tail Light Mod

If you’re looking to add a unique touch to your 5th Gen 4Runner, consider doing a tail light mod. This is a relatively simple modification that can be done at home with just a few tools. You’ll need to purchase some new LED bulbs and then wire them up to the existing taillight harness.

The results are definitely worth the effort, as your 4Runner will stand out from the crowd with its bright, stylish new tail lights.

If you own a 5th gen 4runner, you may have noticed that the tail lights are not very bright. This is a common problem that can be easily fixed with a little mod. All you need to do is remove the two screws that hold the taillight housing in place.

Once you have done this, you will need to disconnect the wiring harness from the back of the housing. Next, remove the three screws that hold the lens in place. Be careful not to drop any of these screws, as they are small and can be easily lost.

Once you have removed the lens, you will need to sand down the edges of the reflector bowl. You can use either sandpaper or a Dremel tool for this. Just make sure that you don’t sand too much, as you don’t want to damage the reflector.

After you have sanded down the reflector, it’s time to install your new LED bulbs. I recommend using Sylvania ZXE Gold bulbs for this mod, as they are some of the brightest on the market. Simply insert them into place and screw them in tightly.

Once all four bulbs are installed, put everything back together in reverse order and enjoy your new and improved tail lights!

Does Morimoto Make Tail Lights?

Yes, Morimoto makes tail lights. Their product line includes LED, HID, and Halogen options for a variety of vehicles. They offer both OEM style replacement tail lights as well as aftermarket style tail lights.

Are the 4Runner Tail Lights Led?

Yes, the 4Runner tail lights are led. The 4runner is a sport utility vehicle produced by Toyota that was introduced in 1984. It was originally built on the Hilux pickup truck platform and shares many features with it.

The 4runner has been available in North America since 1985 and is currently in its fifth generation. The 5th generation 4runner was introduced for the 2010 model year and received a complete redesign. One of the most notable changes for this generation was the addition of LED taillights.

The addition of LED taillights was a significant change for the 5th generation 4runner, as it helped to give it a more modern look. In addition to providing a more modern appearance, LED taillights are also more energy efficient than traditional incandescent bulbs. This is due to the fact that they produce less heat, which results in less power being required to operate them.

As a result, owners of the 5th generation 4runner can expect their tail lights to last longer than those on previous generations of the vehicle.

How Do You Remove the Tail Lights on a Toyota 4Runner?

Assuming you would like instructions on how to remove the tail lights on a 4th generation Toyota 4Runner (2003-2009), here are the steps: 1. Open your 4Runner’s trunk and locate the two plastic fasteners near the center of the taillight assembly. 2. Use a flathead screwdriver or other tool to pry out the center portion of each fastener.

This will release the locking tab on each side, allowing you to remove the entire assembly. 3. Once the taillight assembly is removed, there are three bulbs that need to be removed in order to replace them. The first is the brake light, which is accessed by removing the small black cap on top of the bulb socket and turning it counterclockwise until it comes out.

4. The next bulb is the reverse light, located behind a larger black cap. Again, turn this counterclockwise until it comes out. 5. The last bulb is the turn signal light, located behind a clear lens cover at the bottom ofthe assembly.

Pry off this cover with a flathead screwdriver and then twist outthe bulb socket counterclockwise until it comes free.

5th Gen 4Runner Tail Lights (Smoked / Blacked Out) Installation and Startup Sequence! (cartrimhome)

Conclusion

This blog post is about a modification that can be done to 5th generation 4runners in order to change the tail light bulbs. The process is relatively simple and only requires a few tools. Once the new bulbs are installed, they will provide more light output and better visibility when driving at night.

This mod is a great way to improve safety while also adding a unique look to your 4runner.

Leave a Comment

Your email address will not be published. Required fields are marked *