3Rd Gen 4Runner Tail Light Bulb

If you are in the market for a new set of tail light bulbs for your 3rd gen 4Runner, there are a few things to consider. The first is what type of bulb you want. There are three main types of bulbs: incandescent, halogen, and LED.

Each has its own advantages and disadvantages. Incandescent bulbs are the cheapest option, but they also have the shortest lifespan. Halogen bulbs last longer than incandescent bulbs, but they cost more.

LED bulbs are the most expensive option, but they last much longer than both incandescent and halogen bulbs and use less energy. The next thing to consider is which brand of bulb you want to buy. There are many different brands on the market, and it can be difficult to know which one to choose.

Do some research online or talk to friends who have 4Runners to see if they have any recommendations. Once you’ve narrowed down your choices, it’s time to decide how many bulbs you need.

If you’re looking for a 3rd Gen 4Runner tail light bulb, then you’ve come to the right place. Here at Tail Light Bulbs, we specialize in providing high-quality replacement bulbs for your 4Runner. Whether you need a new brake light bulb or just a regular tail light bulb, we have the perfect solution for you.

We also offer a wide variety of other automotive lighting products, so be sure to check us out today!

Toyota 4Runner Tail Light Bulb Replacement

If your Toyota 4Runner is in need of a tail light bulb replacement, there are a few things you should know. First, the type of bulb you’ll need will be determined by the model year of your vehicle. Pre-2003 models require a 9003/HB2 halogen bulb, while 2003 and newer models use an LED bulb.

You can check your owner’s manual to be sure. Once you know what type of bulb you need, the replacement process is fairly straightforward. For halogen bulbs, simply remove the old one and insert the new one in its place.

Be careful not to touch the glass portion of the new bulb with your fingers, as this can cause it to burn out prematurely. For LED bulbs, first remove the power connector from the old bulb before removing it from its socket. Then press the new LED bulb into place and reconnect the power connector.

That’s it! If you’re not comfortable replacing your own tail light bulbs, no problem – just take it to your local Toyota dealer or mechanic and they can take care of it for you.

How Do You Change a Brake Light on a 2001 Toyota 4Runner?

Assuming you need to replace a brake light and not just a bulb: First, locate the brake light assembly on the back of your 4runner. There are two screws holding it in place – remove these with a Phillips screwdriver.

The entire assembly will now come loose; pull it gently away from the car body. You may find that the wires connecting the brake light are still attached to the 4runner; if so, carefully disconnect them. Now that you have access to the brake light, locate the bulbs you need to replace.

There are usually two or three bulbs in each assembly; depending on which one is burnt out, you’ll either need to replace just one bulb or all of them. To remove a bulb, push down on the tab at its base and twist counterclockwise until it comes loose; then pull it out of its socket. Install new bulbs by reversing this process – push them into their sockets and twist clockwise until they’re tight.

Finally, re-attach the brake light assembly to your 4runner and screw it in place. Reconnect any wires that may have come disconnected during this process, and test your new bulbs by turning on your headlights (they should illuminate along with your taillights).

How Do You Remove the Tail Light on a Toyota 4Runner?

Assuming you need to replace a tail light on your Toyota 4runner: The process for replacing a burnt out taillight on your Toyota 4runner is actually quite simple and only takes a few minutes. Here are the steps you’ll need to follow:

1. Open the trunk of your car and locate the two screws that hold the taillight assembly in place. Remove these screws with a Phillips head screwdriver. 2. Gently pull the taillight assembly away from the car, being careful not to break any of the wires that are still attached.

3. Once the assembly is free, twist each of the bulbs counter-clockwise to remove them from their sockets. 4. Insert new bulbs into each socket (make sure they’re facing the correct direction) and then twist them clockwise until they’re snug. 5. Reattach the taillight assembly to the car by screwing it back into place with the two screws you removed in step one.

6. Close up your trunk and voila! You’ve successfully replaced a burnt out taillight on your Toyota 4runner!

How Do You Change a Brake Light on a Toyota 4Runner?

Assuming you need to change the brake light on the driver’s side: Open the driver’s door and locate the two screws that secure the taillight assembly to the vehicle. Use a Phillips-head screwdriver to remove these screws, then pull back on the taillight assembly to release it from its mounts.

Locate the electrical connector at the back of the taillight housing and disconnect it. You may need to press down on a tab or lever to release it. On some models, there will be a retaining clip holding the bulb in place.

Squeeze this clip and pull it away from the housing, then twist out the old bulb and insert a new one. Reinsert any retaining clips, then reconnect the electrical connector and test your new brake light by depressing your brake pedal with the engine running. Finally, replace your taillight assembly by lining up its mounting holes with those in your vehicle’s body, then threading in and tightening your two screws.

2000 Toyota 4runner rear light bulb. Replacement of bulb. All 3rd gen 4runners.


The third generation 4Runner came with a new design for the tail light bulbs. The new design is said to be more reliable and have a longer lifespan. Some people have reported that their tail light bulbs have lasted for over 10 years without needing to be replaced.

Leave a Comment

Your email address will not be published. Required fields are marked *