The 2012 Hyundai Veloster is a compact car that was introduced in 2011. The Veloster is available in three trim levels: the Base, Turbo, and R-Spec. The Base model comes standard with 16-inch alloy wheels, LED daytime running lights, Bluetooth connectivity, and a six-speaker sound system.
The Turbo model adds 18-inch alloy wheels, foglights, a sunroof, a upgraded infotainment system with an eight-inch touch screen display, and rear parking sensors. The R-Spec model is the performance oriented version of the Veloster and comes standard with 18-inch alloy wheels, Brembo brakes, sport tuned suspension, a body kit, and unique exterior styling cues.
The 2012 Hyundai Veloster is a stylish and modern car that features unique tail lights. These lights help to give the car a distinctive look, and they also provide excellent visibility when driving at night. The Veloster’s tail lights are LED, which means they are extremely bright and energy-efficient.
They also last longer than traditional bulbs, so you won’t have to worry about replacing them as often.
2012 Hyundai Veloster Tail Light Bulb
The 2012 Hyundai Veloster is equipped with LED tail lights. These LED tail lights are located in the rear bumper and use less energy than traditional bulbs. The life expectancy of an LED bulb is also longer, so you may not have to replace them as often.
If one of your Veloster’s LED tail light bulbs burns out, you can replace it yourself. Here’s how:
1. Start by opening the trunk and locate the two access panels on either side of the trunk liner.
2. Remove the access panel screws with a Phillips head screwdriver and set the panel aside.
3. Behind each access panel, you will see a black plastic housing that contains the taillight assembly.
4. Carefully pull back the trunk liner around each housing to reveal the taillight assembly bolts (there are three bolts per side).
5. Using a 10mm socket, remove the three bolts on each side and carefully pull out the entire taillight assembly from behind the trunk liner.
6. Once you have removed both assemblies, disconnect the wiring harnesses by depressing the release tab and pulling them apart (one harness connects to each assembly).
How Do You Change a Tail Light on a Veloster?
Assuming you need to change the entire tail light and not just a bulb:
1. Open your trunk and locate the two screws on either side of the taillight. Remove these screws with a Phillips head screwdriver.
2. Gently pull the taillight assembly away from the car to detach it from the electrical socket. You may need to wiggle it a bit to get it loose.
3. Unscrew the three bolts holding the taillight in place with a Phillips head screwdriver.
These bolts are located on the back of the taillight assembly.
4. Pull out the old taillight and insert the new one in its place, lining up the bolt holes.
5. Screw in the three bolts to secure the new taillight in place, then reattach it to electrical socket by pushing it back into place until it clicks.
Is Tail Light And Brake Light the Same?
No, brake lights and tail lights are not the same. Brake lights are typically red and located at the rear of the vehicle, while tail lights are usually amber or red and located at the back of the vehicle. When you hit the brakes, the brake light illuminates to warn drivers behind you that you’re slowing down.
The tail light, on the other hand, stays lit whenever the car is turned on to signal to drivers behind you that you’re on the road.
What Would Cause One Tail Lights Not to Work?
One possible reason why a tail light may not be working is because the circuit breaker for the taillights has blown. Another possibility is that there is a problem with the wiring leading to the tail light, or that the bulb itself has burned out.
Why are My Tail Lights So Dim?
There are a number of reasons your tail lights may be dim. First, check to see if any bulbs are burned out. If so, replace them with new ones.
It’s also possible that the sockets or wiring harnesses for the bulbs are damaged, which can cause dimming. You’ll need to inspect these components and make repairs as necessary. Finally, the problem could be with the vehicle’s electrical system itself, in which case you’ll need to have it checked out by a mechanic.
How To Replace Brake Light Bulb On A 2012 Hyundai Veloster
Conclusion
The 2012 Hyundai Veloster is a vehicle that has been gaining popularity in recent years. One of the reasons for this popularity is the unique design of the vehicle, which includes LED tail lights. These lights are not only stylish, but they are also very functional.