The 2011 Dodge Dakota has some very stylish tail lights. They are a great addition to the truck and really make it stand out. The taillights are LED and have a very bright and clean look to them.
If you’re looking for a stylish and unique set of tail lights for your 2011 Dodge Dakota, look no further than the LED Tail Lights from Anzo. These lights are made to give your truck a modern look, and they’re also built to last. With a tough polycarbonate housing and an LED bulbs, these lights will withstand whatever you throw at them.
2011 Dodge Dakota Tail Light Bulb
It’s easy to take your vehicle’s tail lights for granted-until one burns out. When that happens, you may be surprised to learn that there are actually several different types of bulbs in your taillight assembly. In most cases, the 2011 Dodge Dakota uses a 9006XS low beam/high beam bulb for its headlights and a 9145 halogen capsule bulb for its fog lights.
The high beam and turn signal use the same 9006XS bulb, but the low beam uses a separate H11 halogen bulb. The taillights on your Dakota use either LED (light emitting diode) or Incandescent bulbs.
The part number for the 2011 Dodge Dakota LED taillight is 68217111AC and the Incandescent part number is 68217111AB .
If you’re not sure which type of bulb your vehicle has, it’s usually noted on the inside of the lens or housing. Replacing a burned out tail light is easy and only takes a few minutes. Simply remove the old bulb from its socket and insert the new one, being careful not to touch the glass with your fingers (the oil from your skin can cause hot spots that will shorten the life of the new bulb).
Why are My 2011 Dodge Dakota Tail Lights Not Working
If your 2011 Dodge Dakota’s tail lights are not working, there are a few potential causes. Here are some things to check:
1. Make sure the tail light bulbs are screwed in securely and that the electrical connections are tight.
2. Check the fuse for the tail lights. If it is blown, replace it with a new one of the same amperage.
3. The problem could be with the wiring harness or connector for the tail lights.
Inspect them for any damage or loose connections and repair or replace as necessary.
4. It’s also possible that a faulty brake light switch could be causing your problem. Try replacing it to see if that solves the issue.
First, Check to See If There is a Blown Fuse
If you have a blown fuse, it will need to be replaced. You can find replacement fuses at most hardware stores. Once you have replaced the fuse, turn the power back on and see if the issue is resolved.
If not, there may be a more serious problem with your electrical system and you should call an electrician.
If the Fuse is Fine, Then the Problem May Be With the Wiring Or With the Bulbs Themselves
If your car’s headlights are not working, the first thing you should check is the fuse. If the fuse is fine, then the problem may be with the wiring or with the bulbs themselves.
Headlight problems can be caused by a number of things, so it’s important to narrow down where the issue is coming from.
If you’ve checked the fuse and found that it’s not blown, then the next step is to check the bulbs themselves. Make sure that they are properly secured in their sockets and that there is no damage to the filament. If everything looks good with the bulbs, then it’s time to move on to checking the wiring.
Look for any loose connections or frayed wires. Sometimes headlight issues can be caused by a simple loose wire connection. If you find any damaged wires, you’ll need to replace them before moving on.
Once you’ve checked all of these things and still can’t get your headlights to work, then it’s time to consult a professional mechanic or auto electrician.
Dodge Dakota Pick Up Tail Light & Bulb Replacement
Conclusion
If your 2011 Dodge Dakota is in need of new tail lights, you’re in luck. There are a few different options to choose from, so you can find the perfect look for your truck. The first option is LED tail lights.
These are becoming increasingly popular, as they provide superior illumination and use less energy than traditional incandescent bulbs. You can also find LED taillights with chrome or smoked lenses for a unique appearance. Another option is Euro-style taillights, which have a sleek and modern look.
These are available in both clear and tinted versions. Finally, if you want something really different, you can go for blacked-out taillights. These have a unique look that is sure to turn heads whenever you hit the road.