2009 Hyundai Sonata Tail Light

In 2009, Hyundai released the Sonata Tail Light, a LED taillight that became available as an option on the 2009 Sonata. The Sonata Tail Light was designed to provide better visibility and safety for drivers, and it quickly became a popular feature on the vehicle. Hyundai continued to offer the Sonata Tail Light as an option on subsequent models of the vehicle, and it remains a popular feature among drivers today.

The 2009 Hyundai Sonata features a sleek and stylish tail light design. This unique feature is sure to turn heads and make your car stand out from the rest. The LED lights provide superior illumination, making it easier to see at night or in low-light conditions.

2009 Hyundai Sonata Tail Light Bulb Size

The 2009 Hyundai Sonata uses a LED tail light bulb. The part number for the LED bulb is 921-0230. The LED bulbs are available at most auto parts stores.

How Do You Change a Taillight Bulb on a 2009 Hyundai Sonata?

Assuming you need to replace just the brake/taillight: 1. Open the trunk and remove the spare tire cover. 2. Unscrew and remove the two bolts that hold the taillight assembly in place using a Phillips screwdriver.

The lower bolt is longer than the upper one. 3. Carefully pull the taillight out, disconnecting it from the harness. 4. Remove any clips or screws holding the bulb socket in place and twist it counterclockwise to remove it from the housing.

5. Pull out the old bulb from its socket and insert a new one, making sure it’s seated correctly in its base before twisting clockwise to lock it in place. 6Reattach any clips or screws removed earlier, then line up and reinsertthe taillight into its housing on the car, being careful not to breakthe seal around it. 7Screw in both bolts hand-tight until they’re snug against their grommets but don’t overtighten them – you can strip out their threads easily if you’re not careful!

Is the Tail Light And Brake Light the Same Light?

No, the tail light and brake light are not the same. The brake light is a red light that illuminates when you press the brakes. The purpose of the brake light is to warn drivers behind you that you are slowing down or stopping.

The tail light is a white or red light that illuminates when your car is turned on and serves as a marker for drivers behind you.

Which Bulb on Tail Light is Brake Light?

There are two bulbs on a car’s tail light: the brake light and the turn signal. The brake light is the one that illuminates when the brakes are applied. It is usually larger than the turn signal bulb and is located in the center of the taillight assembly.

The turn signal bulb is located either above or below the brake light, depending on the make and model of the vehicle.

Why Does One Tail Light Running Light Go Out?

If one tail light running light goes out, it is likely due to a blown fuse. The fuse can be located in the engine bay or under the dash. If the fuse is blown, replace it with a new one of the same amperage.

How to replace Brake Light bulbs


The 2009 Hyundai Sonata has a new tail light design that is very different from the previous year’s model. The new design is much sleeker and more modern looking. There are LED lights in the taillights, which give the car a more premium look.

The overall effect is very striking and makes the car stand out from other midsize sedans on the road.

Leave a Comment

Your email address will not be published. Required fields are marked *