2008 Saab 9 3 Tail Light Bulb

The 2008 Saab 9 3 is a vehicle that comes with several different types of tail light bulbs. The most common type of bulb is the incandescent, which uses a filament that is heated by an electric current. These bulbs are very efficient and have a long life span.

However, they are not as bright as LED or HID bulbs.

If your 2008 Saab 9-3 needs a new tail light bulb, don’t worry – it’s an easy fix! Here’s what you’ll need to do: 1. Open the trunk and locate the taillight assembly.

On each side, there are two screws holding the assembly in place. Use a Phillips head screwdriver to remove these screws. 2. Gently pull the taillight assembly away from the car body.

There are three wires connected to the back of the assembly – two for the brake lights and one for the turn signal. Disconnect these wires by pushing on the release tab and pulling them out of their sockets. 3. Reach inside the taillight housing and remove the old bulb by turning it counterclockwise until it comes loose.

Insert a new bulb (make sure it is properly oriented!) and turn it clockwise until tight.

Saab 9-3 Bulb List

The Saab 9-3 is a compact executive car that was originally developed and manufactured by the Swedish automaker Saab. The 9-3 was first introduced in 1998 for the 1999 model year, and it was later facelifted in 2002. It is based on the GM Epsilon platform, which also underpins the Opel Vectra and Chevrolet Malibu.

There are a variety of different bulbs used throughout the Saab 9-3, depending on the model year and trim level. Here is a list of some of the most common bulbs found in the Saab 9-3: Headlights: H1, H4, or H7 (low beam); 9005 or HB3 (high beam)

Fog lights: H8 or 9006 Tail lights: W5W or 3157 Parking lights/daytime running lights: W5W or 3157A

Turn signals: 1157A or 4114K Reverse lights: 7440 or 7443

How Do I Replace a Burnt Out Tail Light Bulb on My 2008 Saab 9-3

Assuming you have a 2008 Saab 9-3, the process of replacing a burnt out tail light is as follows: 1. Locate the burnt out bulb. On your 9-3, the bulbs are located in the taillight assembly.

To access them, open your trunk and remove the two screws that hold the taillight assembly in place. Once the screws are removed, pull the entire assembly away from your car to expose the back of it. 2. Find the correct replacement bulb for your car.

For a 2008 9-3, you will need a #7528 bulb. You can purchase this type of bulb at most auto parts stores or online retailers that sell automotive products. 3. Remove the old bulb from its socket by twisting it counterclockwise until it comes loose.

Be careful not to touch the glass part of the bulb with your bare hands, as this can cause premature failure of the new bulb. 4 . Insert the new bulb into its socket and twist it clockwise until tight.

Make sure thatthe new bulb is seated correctly in its socket before reassembling your taillight assembly and reinstalling it on your car.

Saab 9-3 tail light bulbs replacement | EASY how to


If your 2008 Saab 9-3 has a tail light bulb that needs to be replaced, follow these steps. First, open the trunk and locate the bulbs. There are two on each side.

Second, use a Phillips screwdriver to remove the screws that hold the bulbs in place. Third, pull out the old bulbs and insert new ones. Fourth, screw the bulbs back in place.

Finally, close the trunk and test the lights to make sure they work.

Leave a Comment

Your email address will not be published. Required fields are marked *