If you’re in the market for a used car, the 2006 Honda Accord is a great option. It’s reliable, efficient, and has a wide variety of features that make it a comfortable ride. One feature that makes the Accord stand out is its rear tail light.
The taillight is not only stylish, but it’s also very functional. It’s one of the few things on the car that can be easily seen at night, making it safer to drive.
If your 2006 Honda Accord has a broken rear tail light, you may be wondering how to replace it. Here’s a quick guide to help you get the job done.
First, you’ll need to remove the broken tail light assembly from the vehicle.
To do this, simply unscrew the two bolts that hold it in place. Once the assembly is removed, you can access the bulb socket by pushing on the tab at the top of it. Next, twist off the old bulb and insert a new one into the socket.
Be sure to check that the new bulb is correctly oriented before screwing it in place. Finally, reattach the tail light assembly and screw it back into place. That’s all there is to it!
2006 Honda Accord Tail Light Bulb
If your 2006 Honda Accord is in need of a new tail light bulb, don’t worry – changing it is easy! Just follow these simple steps and you’ll have your new bulb installed in no time.
First, open up the trunk and locate the taillight assembly.
There are two screws that hold it in place – remove these with a Phillips head screwdriver. Once the screws are out, carefully pull the assembly away from the car so you can access the bulbs. There are three bulbs in total – two brake lights and one reverse light.
To change the brake light bulbs, simply twist them counterclockwise and pull them out. Replace them with new bulbs (make sure they’re properly seated), then twist them clockwise to lock them into place. To change the reverse light bulb, first disconnect the electrical connector by depressing the tab and pulling it off.
Then, twist the bulb counterclockwise and pull it out of its socket. Insert a new bulb (again, making sure it’s properly seated), then twist it clockwise until tight. Reconnect the electrical connector, then re-install the taillight assembly (two screws) and close up the trunk.
You’re all done!
What are the Dimensions of the 2006 Honda Accord Rear Tail Light
The 2006 Honda Accord has a rear tail light that is 13.5 inches wide and 4.5 inches tall. The light is made of durable polycarbonate material and has a clear lens with a red LED brake light and turn signal indicator.
How Many Bulbs Does the 2006 Honda Accord Rear Tail Light Have
The 2006 Honda Accord rear tail light has three bulbs.
What is the Part Number for the 2006 Honda Accord Rear Tail Light
The 2006 Honda Accord rear tail light part number is 33505-S84-A01. This part is made by Honda and fits the 2006 model year Accord. The rear tail light provides illumination for the rear of the vehicle and is an important safety feature.
Where Can I Find a Replacement Bulb for the 2006 Honda Accord Rear Tail Light
If you’re looking for a replacement bulb for the 2006 Honda Accord rear tail light, your best bet is to check with your local Honda dealership. They should be able to help you out and get you the right bulb for your car. You can also try checking online with some of the aftermarket parts retailers.
How Do I Replace a Burnt Out Bulb in the 2006 Honda Accord Rear Tail Light
Assuming you are talking about the taillight and not the brake light or turn signal:
To replace a burnt out bulb in the 2006 Honda Accord rear tail light, first open the trunk. There is a panel on the left side that needs to be pried off.
The bulbs are located behind this panel. To remove the old bulb, twist it counterclockwise and pull it out. To insert the new bulb, insert it into the socket and twist it clockwise until it’s tight.
Replace the panel and close the trunk.
Replace Honda Accord Tail Light Assembly (2006 And Newer)
If your 2006 Honda Accord has a broken tail light, you may be wondering how to replace it. Luckily, this is a relatively simple process that you can do yourself. First, you’ll need to remove the broken lens by prying it off with a flathead screwdriver.
Once the lens is removed, you can access the bulbs and sockets. To remove the bulb, simply twist it counterclockwise and pull it out. Then, insert the new bulb into the socket and twist it clockwise until it’s tight.
Finally, snap the lens back into place and you’re done!