2002 Hyundai Accent Tail Light

It’s time to replace the tail light on your 2002 Hyundai Accent. This quick and easy repair can be done in a few minutes with just a few tools. You’ll need a new tail light, a screwdriver, and a socket wrench.

The first step is to remove the two screws that hold the old tail light in place. Once the screws are removed, you can pull the old tail light out of the car. Be careful not to drop it or damage the wires.

Next, take your new tail light and insert it into the hole where the old one was located. Make sure it is snug and secure before moving on. Finally, use your screwdriver and socket wrench to tighten down the two screws that hold the new tail light in place.

That’s all there is to it! In no time at all, you’ll have your new tail light installed and working properly.

The 2002 Hyundai Accent is a great car. It’s comfortable, efficient, and stylish. But one of its best features is its tail light.

The design is modern and sleek, and it really stands out on the road. Plus, it’s super bright, so you can always see where you’re going.

2003 Hyundai Accent Tail Light Bulb

If you’re in need of a new tail light bulb for your 2003 Hyundai Accent, you’ve come to the right place. This quick and easy guide will show you how to change the bulb in no time. First, open up the trunk and locate the two screws that hold the taillight assembly in place.

Remove these screws and carefully pull the assembly away from the car. You may need to wiggle it a bit to get it loose. Once the assembly is loose, reach in and disconnect the wiring harness.

Then, twist out the old bulb and insert a new one in its place. Be sure to insert it with the correct orientation – there’s usually a small tab on the base of the bulb that must line up with a corresponding notch in the socket. Finally, reconnect the wiring harness and reattach the taillight assembly.

How Do I Replace a Burned Out Tail Light on My 2002 Hyundai Accent

If one of the tail lights on your 2002 Hyundai Accent has burned out, you’ll need to replace it as soon as possible. Not only is it illegal to drive without all of your taillights functioning, but it’s also dangerous. Here’s how to replace a burned out tail light on your Hyundai Accent:

1. Open the trunk and locate the two screws that hold the taillight assembly in place. Remove these screws with a Phillips head screwdriver. 2. Pull the taillight assembly away from the car and disconnect the electrical connector by pushing in on the release tab and pulling apart.

3. Take out the old bulb by turning it counterclockwise and pull it straight out. Insert a new bulb into the socket, turn it clockwise until tight, and reconnect the electrical connector. 4. Reattach the taillight assembly to the car using the two screws and close up the trunk.

2000-02 Hyundai Accent How to replace Turn signals Tail lights and reverse lights


If your 2002 Hyundai Accent is in need of a new tail light, you’re in luck. There are plenty of great options on the market that will fit your car perfectly. You can find LED, halogen, and even brake light options to choose from.

Depending on your budget and preferences, you can find the perfect tail light for your car.

Leave a Comment

Your email address will not be published. Required fields are marked *