When it comes to finding the right 2001 Subaru Outback tail light bulb, there are a few things you need to take into consideration. First and foremost, you need to know what type of bulb your vehicle requires. There are two different types of bulbs available for this model year: halogen and LED.
Depending on your personal preference and budget, either option could be the right choice for you. If you’re looking for a more affordable option, halogen bulbs are typically the way to go. However, if you want your taillights to last longer and be brighter, LED bulbs may be worth the investment.
If you’re in need of a new tail light bulb for your 2001 Subaru Outback, we’ve got you covered. Here at BulbHQ, we carry a wide selection of bulbs to fit your needs. Whether you’re looking for a standard replacement bulb or an LED upgrade, we have what you’re looking for.
And if you’re not sure which bulb is right for your car, our helpful customer service team is always happy to assist. So don’t wait any longer, order your new tail light bulb today!
2001 Subaru Outback Tail Light Bulb Replacement
If your 2001 Subaru Outback is in need of a new tail light bulb, don’t worry – the replacement process is easy and only takes a few minutes! Here’s what you’ll need to do:
1. Open up the trunk and locate the two screws that hold the taillight assembly in place.
Remove these screws with a Phillips head screwdriver.
2. Carefully pull the taillight assembly away from the car body – there are still electrical connections attached, so be careful not to damage anything.
3. Locate the burned out bulb at the back of the assembly – it will be obvious which one it is!
Using a small flathead screwdriver, carefully twist and remove the old bulb from its socket.
4. Insert the new bulb into the socket, again being careful not to touch it with your fingers (the oil from your skin can shorten its life). Twist it until it’s snugly in place.
Is the Tail Light Bulb the Same As the Brake Light Bulb?
Are the tail light bulb and brake light bulb the same?
The answer is no, the tail light bulb and brake light bulb are not the same. The brake light bulb is usually brighter than the tail light bulb.
The reason for this is because when you hit the brakes, all of the sudden your car needs to be more visible to drivers behind you.
Tail lights are just that- they show up as red lights in taillights when driving at night or in low-light conditions so that drivers behind you can see your car. Brake lights come on when you press down on the brakes, and they’re typically brighter than your regular tail lights.
This is so that drivers behind you will know that you’re stopping and they should start slowing down too.
Which Bulb on Tail Light is Brake Light?
On a typical car, the brake light is the middle bulb on the tail light. The other two bulbs are the turn signal and the backup light. When you hit the brakes, a switch is activated that sends power to the brake light.
Can You Replace a Tail Light Bulb by Yourself?
If your car has a tail light out, you may be wondering if you can replace the bulb by yourself. The answer is yes, in most cases replacing a tail light bulb is a relatively easy process that can be completed in just a few minutes.
To start, you’ll need to open up the back of your car where the tail lights are located.
In most cars this is done by removing a couple of screws that hold the panel in place. Once the panel is removed, you’ll be able to see the back of the tail light assembly.
Next, locate the burnt out bulb and remove it from its socket.
To do this, simply twist it counterclockwise until it comes loose. Then, insert the new bulb into the socket and screw it in clockwise until tight.
Finally, put everything back together and test your new tail light to make sure it’s working properly.
If all goes well, you should now have two functioning tail lights!
How Do You Change a Rear Tail Light Bulb?
There are a few things you need to know in order to change a rear tail light bulb. First, you need to identify which type of bulb your car uses. There are two types of bulbs commonly used in cars: incandescent and LED.
Incandescent bulbs use a filament that heats up and glows to produce light, while LED (light emitting diode) bulbs use semiconductors that emit light when an electric current is passed through them.
If your car has incandescent tail lights, then changing the bulb is a relatively simple process. You just need to remove the old bulb and insert a new one in its place.
Make sure you don’t touch the glass of the new bulb with your fingers, as this can cause it to break.
If your car has LED tail lights, then the process is slightly different. LED bulbs are usually connected to a circuit board inside the taillight housing.
To change the bulb, you’ll need to remove the entire taillight assembly from the car so that you can access the circuit board.
How To Replace Tail Light 00-04 Subaru Outback
Conclusion
If you’re looking for a 2001 Subaru Outback tail light bulb, you’ve come to the right place. Here at Tail Light Bulbs, we carry a wide selection of bulbs to fit your needs. Whether you’re looking for a replacement bulb or an upgrade, we have what you’re looking for.
Browse our selection and find the perfect bulb for your car.