The 1992 Accord came with a few different tail light options. The basic model had a single, red brake light in the center of the rear window, while the LX and EX models featured two separate brake lights, one on each side of the trunk. The 1991 and 1992 Accords also offered an optional spoiler-mounted third brake light.
Regardless of which option you choose, our LED replacement bulbs will give your car’s back end a modern look and feel.
The taillights on the 1992 Accord are a bit different than most other cars. They have a unique design that makes them stand out from the rest. The taillights on the 1992 Accord are made to look like they are two separate pieces, but they are actually one piece.
The bottom part of the taillight is clear, while the top part is red. This allows for more light to be emitted from the taillights, making them more visible to other drivers.
93 Honda Accord Tail Light Bulb
When it comes to changing a tail light bulb on a 93 Honda Accord, it is important to know which size and type of bulb you need. The most common type of bulbs for this model year are 9006 (low beam) and 9003 (high beam). You can usually find these types of bulbs at your local auto parts store.
Once you have the correct type and size of bulb, the next step is to actually change it. To do this, first open up the trunk and locate the taillight assembly. There are two bolts that hold the assembly in place – one on top and one on bottom.
Remove these bolts with a wrench or socket set.
With the bolts removed, carefully pull the taillight assembly away from the car body. There are three wires that connect the taillight to the car’s electrical system – two for the brake lights and one for the turn signal.
Disconnect these wires by gently pushing on the release tab located near each wire connector.
Once all three wires are disconnected, you should be able to remove the old tail light bulb from its socket by turning it counterclockwise. Insert the new bulb into its socket and turn clockwise until tight.
Reconnect all three wires to their respective sockets in the taillight assembly, then reattach the entire assembly to the car body using your wrench or socket set.
What are 1992 Accord Tail Lights
Tail lights are an important safety feature on any vehicle. They help other drivers know when you are braking and make it easier for them to see your car at night. The 1992 Accord was one of the first cars to offer LED tail lights as an option.
These were a big improvement over the traditional incandescent bulbs, as they were much brighter and lasted longer. Today, almost all carmakers offer LED tail lights as an option on their vehicles.
How Do I Replace My 1992 Accord’S Tail Lights
Assuming you would like instructions on how to replace the tail lights on a 1992 Honda Accord:
To start, open the trunk and locate the two Phillips head screws that secure the taillight assembly to the car. Next, disconnect the electrical connector from the bulb holder by depressing the release tab and pulling it straight out.
With those two things undone, you can now remove the entire taillight assembly by giving it a good tug straight back until it pops out of its housing.
For installation, simply reverse these steps. Start with reconnecting the electrical connector (again, depress release tab while pushing it in) and then screw in both Phillips head screws until they’re snug.
Test your new bulbs by turning on your hazard lights – they should both be illuminated brightly.
What are Some Common Problems With 1992 Accord Tail Lights
One of the most common problems with 1992 Accord tail lights is that they can become dislodged from the vehicle. This usually happens when the vehicle is involved in an accident, but it can also happen if the vehicle hits a large pothole or other object in the road. If this happens, it is important to have the tail light repaired by a qualified mechanic as soon as possible.
Another common problem with 1992 Accord tail lights is that they can become cracked or broken. This can happen for a number of reasons, but it is most often caused by careless driving. If you hit something hard enough with your tail light, it can easily crack or break.
If this happens, you will need to replace the entire tail light assembly.
If your 1992 Accord has been in an accident, or if you have hit a large pothole, it is important to inspect your tail lights carefully before driving again. Make sure that all of the bulbs are still working and that there are no cracks or breaks in the lens.
If you see any damage, make sure to get it fixed right away so you don’t have any accidents while driving with faulty tail lights.
HONDA Accord 1992 custom tail lights
Conclusion
You may not have realized it, but your 1992 Accord tail lights are an important part of your car. Not only do they help you see at night, but they also help other drivers see you. If your tail lights are not working properly, it could be a safety hazard.
There are a few things that can cause your tail lights to stop working. One is if the bulbs burn out. Another is if the wires become disconnected.
And finally, if the fuse blows, this will also cause your tail lights to stop working.
If you’re having trouble with your tail lights, the first thing you should check is the bulbs. If they appear to be burned out, replace them with new ones.
Next, check the wires to make sure they’re connected properly. Finally, check the fuse to see if it needs to be replaced.
Hopefully these tips will help you get your 1992 Accord tail lights working again in no time!