There are many things to love about a classic car like a 1956 Chevy. One of the most iconic and noticeable features on these cars is the tail light assembly. Though it may seem like a small detail, the unique design of the 1956 Chevy tail light assembly is one of the things that makes these cars so special.
If you’re lucky enough to own one of these beauties, or are thinking about buying one, here’s what you need to know about the tail light assembly on a 1956 Chevy.
1956 Chevy Tail Light Assembly: How to Install and Remove
If you’re looking for a way to add some extra flair to your 1956 Chevy, consider installing a new tail light assembly. This guide will show you how to both install and remove your new tail light assembly, so you can get the look you want without any hassle.
To install your new tail light assembly, first remove the old one by unscrewing the two screws that hold it in place. Once the old assembly is removed, simply screw in the new one using the same screws. Tighten them until it feels secure, then test it out by turning on your headlights to make sure the taillights are working properly.
To remove your tail light assembly, simply unscrew the two screws that hold it in place and pull it off. You may need to wiggle it a bit to get it loose, but once it’s free you can easily replace it with a new one. With just a few simple steps, you can change up the look of your 1956 Chevy in no time!
Danchuk 56 Chevy Tail Lights
Danchuk is a manufacturer of classic Chevy parts, and their 56 Chevy tail lights are some of the most popular on the market. These LED lights are designed to look like the original taillights on a 1956 Chevrolet, and they’re made with modern materials and technology for superior performance. While they may not be an exact replica of the originals, these Danchuk tail lights will give your car that classic look that’s sure to turn heads.
What are the Dimensions of the 1956 Chevy Tail Light Assembly
Assuming you are referring to the 1956 Chevy Bel Air, the dimensions of the tail light assembly are as follows: Width: 7.5 inches Height: 5 inches
What is the Function of the 1956 Chevy Tail Light Assembly
The 1956 Chevy Tail Light Assembly is responsible for providing illumination to the rear of the vehicle. This includes both brake lights and turn signals. The assembly is made up of several different parts, including the lens, reflector, and bulb.
The lens is what actually allows light to pass through, while the reflector helps to direct that light in a specific direction. The bulb provides the actual light source.
How Do You Install the 1956 Chevy Tail Light Assembly
Assuming you have the 1956 Chevy Tail Light Assembly:
1. Open your trunk and locate the two bolts that secure the taillight housing to the car.
2. Remove the bolts with a socket wrench, being careful not to drop them inside the trunk.
3. Pull the old taillight housing away from the car, disconnecting the electrical wiring harness from it in the process.
4. Compare the new taillight housing to the old one to make sure they are identical. If they are not, do not attempt to install it as it will not fit correctly and could cause problems later on down the road.
5. Connect the new taillight housing’s electrical wiring harness to its corresponding connectors on your car.
6. Hold the new taillight housing in place and insert both bolts, tightening them down with a socket wrench until they are snug but don’t overtighten them as you could strip out the threads in aluminum housings like this one..
How to Remove & Replace 1955 Chevy Taillights | Danchuk USA
Conclusion
If you’re looking for a 1956 Chevy tail light assembly, you’ve come to the right place. Here at Classic Industries, we have a wide selection of parts and accessories for your classic car. Whether you’re looking for a replacement part or an upgrade, we have what you need.
Tail lights are an important safety feature on your car, so it’s important to choose the right ones. With our wide selection, you’re sure to find the perfect set of tail lights for your 1956 Chevy.